SN75179BP, Дифференциальный драйвер/приемник дуплекс
Изображения служат только для ознакомления. См. документацию товара
Дифференциальный драйвер/приемник дуплекс
Технические параметры
-
КорпусDIP-8
-
Нормоупаковка50 шт
-
Тип устройства
-
Протокол
-
Число приемников/передатчиков
-
Дуплекс
-
Гистерезис приемника
-
Напряжение питания
Описание SN75179BP
The SN75179BP is a Differential Driver and Receiver Pair designed for balanced transmission-line applications and meets TIA/EIA-422-B, TIA/EIA-485-A and ITU recommendation V.11. It is designed to improve the performance of full-duplex data communications over long bus lines. The SN75179B driver output provides limiting for both positive and negative currents. The receiver features high input impedance, input hysteresis for increased noise immunity and input sensitivity of ±200mV over a common-mode input voltage range. The driver provides thermal shutdown for protection from line fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The SN75179B is designed to drive current loads of up to 60mA maximum.
• Positive and negative current limiting
• Driver thermal shutdown protection
• Low power requirements
| Base Product Number | SN75179 -> |
| Duplex | Full |
| ECCN | EAR99 |
| HTSUS | 8542.39.0001 |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Drivers/Receivers | 1/1 |
| Operating Temperature | 0В°C ~ 70В°C |
| Package | Tube |
| Package / Case | 8-DIP (0.300"", 7.62mm) |
| Protocol | RS422, RS485 |
| REACH Status | REACH Unaffected |
| Receiver Hysteresis | 50mV |
| RoHS Status | ROHS3 Compliant |
| Supplier Device Package | 8-PDIP |
| Type | Transceiver |
| Voltage - Supply | 4.75V ~ 5.25V |
| Вес, г | 1 |
