SN74HC574DW, Регистр неинвертирующий 8-бит + шинный интерфейс КМОП кристалл, SOT/R
Регистр неинвертирующий 8-бит + шинный интерфейс КМОП кристалл, SOT/R
Технические параметры
-
КорпусSO20W
-
Тип упаковкиTube (туба)
-
Нормоупаковка25 шт
-
Вес брутто1.08 г.
-
Напряжение питания, В
Описание SN74HC574DW
The SN74HC574DW is an octal edge-triggered D-type Flip-flop with 3-state outputs. It is designed specifically for bus driving. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. The eight flip-flops enter data on the low-to-high transition of the clock (CLK) input. A buffered output-enable (OE\) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. OE\ does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
• High-current 3-state non-inverting outputs drive bus lines directly or up to 15 LSTTL loads
• Bus-structured pinout
• 22ns Typical tpd
• 80µA Maximum low power consumption
• ±6mA Output drive at 5V
• 1µA Maximum low input current
• Green product and no Sb/Br
Технология | hc |
Функциональное назначение | регистр |
Вес, г | 1.7 |
-
74HC574D,653 D-TYPE POS TRG SNGL 20SOICНаличие:1524 штМинимум:штЦена от:30,15 ₽NEXSO20
-
74HC574D,652 D-TYPE POS TRG SNGL 20SOICNEXSO20W
-
MC74HC574ADWG D-TYPE POS TRG SNGL 20SOICONSSO20W
-
MC74HC574ADWR2G D-TYPE POS TRG SNGL 20SOICONSSO20W
-
CD74HC574M D-TYPE POS TRG SNGL 20SOICTexasSO20W
-
CD74HC574M96 D-TYPE POS TRG SNGL 20SOICTexasSO20W
-
M74HC574RM13TR D-TYPE POS TRG SNGL 20SOICSTMSO20W
-
MM74HC574WM D-TYPE POS TRG SNGL 20SOICONSSO20W
-
MM74HC574WMX D-TYPE POS TRG SNGL 20SOICONSSO20W